+8615381730722
+8615381730722
1.Complete models
Sonly has invested amount of money in the continuous design and development of 28 models of U-TS series of 98-3400 tons, and the one-time development of casting wood molds to form a series of modules to meet various individual needs and cost-effective.
2.High repeatability
With more than 20 years of practical experience in research and development of plastic machines, using servo system, which is stable and fast, high efficiency and energy saving, low noise, high repeatability.
| 规格参数 / Specifications | ||||||
|---|---|---|---|---|---|---|
| 国际认可型号 / INTERNATIONALLY RECOGNIZED MODEL | 11573 | |||||
| 注塑机 / INJECTION UNIT | A | B | C | D | ||
| 注塑机 / INJECTION UNIT | ||||||
| Screw Diameter / 螺杆直径 | mm / 毫米 | 110 | 120 | 130 | 140 | |
| Screw L/D Ratio / 螺杆长径比 | L/D | 24 | 22 | 20.3 | 18.9 | |
| Shot Volume / 射出量 | cm³ / 立方厘米 | 5654 | 6729 | 7897 | 9158 | |
| Injection Pressure / 注射压力 | Mpa | 204.7 | 172 | 146.6 | 126.4 | |
| Screw Speed / 螺杆转速 | rpm | 96 | ||||
| Shot Weight / 射出重量 | g / 克 | 5145 | 6123 | 7186 | 8335 | |
| Shot Weight / 射出重量 | oz / 盎司 | 181.485 | 215.98 | 253.4 | 294 | |
| 夹紧装置 / CLAMPING UNIT | ||||||
| Clamping Force / 夹紧力 | Kn | 14000 | ||||
| Toggle Stroke / 复位行程 | mm / 毫米 | 1400 | ||||
| Space Between Tie Bars / 夹具间距 | mm / 毫米 | 1350*1300 | ||||
| Max. Mould Height / 最大模具高度 | mm / 毫米 | 1300 | ||||
| Min. Mould Height / 最小模具高度 | mm / 毫米 | 530 | ||||
| Ejector Stroke / ejector 行程 | mm / 毫米 | 350 | ||||
| Ejector Force / ejector 力量 | Kn | 246 | ||||
| Ejector Number / ejector 数量 | 20+1 | |||||
| 其他 / OTHERS | ||||||
| Die Hole Diameter / 模孔直径 | mm / 毫米 | 250 | ||||
| System Pressure / 系统压力 | Mpa | 16 | ||||
| Motor Power / 电机功率 | Kw | 55+55 | ||||
| Heating Power / 加热功率 | Kw | 97 | ||||
| Oil Tank Cubage / 油箱容量 | L / 升 | 2200 | ||||
| Machine Weight / 机器重量 | Ton / 吨 | 18+47 | ||||
| Boundary Dimension / 外形尺寸 | m / 米 | 6.5*2.6*3.2 7.5*3.1*2.8 |
||||
| Servo Driver Capacity / 伺服驱动器容量 | Kw | 30+45+45 | ||||
1.Complete models
Sonly has invested amount of money in the continuous design and development of 28 models of U-TS series of 98-3400 tons, and the one-time development of casting wood molds to form a series of modules to meet various individual needs and cost-effective.
2.High repeatability
With more than 20 years of practical experience in research and development of plastic machines, using servo system, which is stable and fast, high efficiency and energy saving, low noise, high repeatability.
Zhejiang Sonly Intelligent Equipment Co., Ltd Injection Molding Machine
