+8615381730722
+8615381730722
1.Complete models
Sonly has invested amount of money in the continuous design and development of 28 models of U-TS series of 98-3400 tons, and the one-time development of casting wood molds to form a series of modules to meet various individual needs and cost-effective.
2.High repeatability
With more than 20 years of practical experience in research and development of plastic machines, using servo system, which is stable and fast, high efficiency and energy saving, low noise, high repeatability.
| SPECIFICATIONS (规格) | U300TS | |||
| INTERNATIONALLY RECOGNIZED MODEL (国际认可型号) | 1685 | |||
| INJECTION UNIT (注射单元) | A | B | C | |
| INJECTION UNIT (注射单元) | ||||
| SCREW DIAMETER (螺杆直径) | mm | 55 | 60 | 65 |
| SCREW L/D RATIO (螺杆L/D比) | L/D | 24 | 22 | 20.5 |
| SHOT VOLUME (注射体积) | cm3 | 842.8 | 1003 | 1177.1 |
| INJECTION PRESSURE (注射压力) | Mpa | 199.8 | 167.9 | 143.1 |
| SCREW SPEED (螺杆速度) | rpm | 189 | ||
| SHOT WEIGHT (注射重量) | g | 767 | 913 | 1071 |
| SHOT WEIGHT (注射重量) | oz | 27.055 | 32.205 | 37.778 |
| CLAMPING UNIT (夹紧单元) | ||||
| CLAMPING FORCE (夹紧力) | Kn | 3000 | ||
| TOGGLE STROKE (摇臂行程) | mm | 590 | ||
| SPACE BETWEEN TIE BARS (夹紧杆之间的距离) | mm | 610*585 | ||
| MAX.MOULD HEIGHT (最大模具高度) | mm | 640 | ||
| MIN.MOULD HEIGHT (最小模具高度) | mm | 200 | ||
| EJECTOR STROKE (推出行程) | mm | 150 | ||
| EJECTOR FORCE (推出力) | Kn | 70 | ||
| EJECTOR NUMBER (推出器数量) | 12+1 | |||
| OTHERS (其他) | ||||
| DIE HOLE DIAMETER (模孔直径) | mm | 160 | ||
| SYSTERM PRESSURE (系统压力) | Mpa | 16 | ||
| MOTOR POWER (电动机功率) | Kw | 30 | ||
| HEATING POWER (加热功率) | Kw | 21.5 | ||
| OIL TANK CUBAGE (油箱容积) | L | 400 | ||
| MACHINE WEIGHT (机器重量) | Ton | 10 | ||
| BOUNDARY DIMENSION (边界尺寸) | m | 6.86*1.65*2.46 | ||
| SERVO DRIVER CAPACITY (伺服驱动器容量) | Kw | 45 | ||
1.Complete models
Sonly has invested amount of money in the continuous design and development of 28 models of U-TS series of 98-3400 tons, and the one-time development of casting wood molds to form a series of modules to meet various individual needs and cost-effective.
2.High repeatability
With more than 20 years of practical experience in research and development of plastic machines, using servo system, which is stable and fast, high efficiency and energy saving, low noise, high repeatability.
Zhejiang Sonly Intelligent Equipment Co., Ltd Injection Molding Machine
