+8615381730722
+8615381730722
1.Complete models
Sonly has invested amount of money in the continuous design and development of 28 models of U-TS series of 98-3400 tons, and the one-time development of casting wood molds to form a series of modules to meet various individual needs and cost-effective.
2.High repeatability
With more than 20 years of practical experience in research and development of plastic machines, using servo system, which is stable and fast, high efficiency and energy saving, low noise, high repeatability.
|
SPECIFICATIONS 规格 |
U218TS |
|||
|
INTERNATIONALLY RECOGNIZED MODEL 国际认可型号 |
1067 |
|||
|
INJECTION UNIT 注射单元 |
A |
B |
C |
|
|
INJECTION UNIT 注射单元 |
||||
|
SCREW DIAMETER 螺杆直径 |
mm |
45 |
50 |
55 |
|
SCREW L/D RATIO 螺杆长径比 |
L/D |
24.4 |
22 |
20 |
|
SHOT VOLUME 注射量 |
cm3 |
460 |
569 |
688 |
|
INJECTION PRESSURE 注射压力 |
Mpa |
227.5 |
184.3 |
152.3 |
|
SCREW SPEED 螺杆转速 |
rpm |
180 |
||
|
SHOT WEIGHT 注射重量 |
g |
419 |
518 |
627 |
|
SHOT WEIGHT 注射重量 |
oz |
14.78 |
18.27 |
22.11 |
|
CLAMPING UNIT 模具夹紧单元 |
||||
|
CLAMPING FORCE 夹紧力 |
Kn |
2180 |
||
|
TOGGLE STROKE 开模行程 |
mm |
500 |
||
|
SPACE BETWEEN TIE BARS 横梁间距 |
mm |
510*510 |
||
|
MAX.MOULD HEIGHT 最大模具高度 |
mm |
530 |
||
|
MIN.MOULD HEIGHT 最小模具高度 |
mm |
200 |
||
|
EJECTOR STROKE 注射器行程 |
mm |
150 |
||
|
EJECTOR FORCE 注射器力 |
Kn |
70 |
||
|
EJECTOR NUMBER 注射器数量 |
8+1 |
|||
|
OTHERS 其他 |
||||
|
DIE HOLE DIAMETER 模孔直径 |
mm |
Φ60 |
||
|
MACHINE DIMENSION 机器尺寸 |
mm |
3800x1000x2700 |
||
|
MACHINE WEIGHT 机器重量 |
kg |
8500 |
||
1.Complete models
Sonly has invested amount of money in the continuous design and development of 28 models of U-TS series of 98-3400 tons, and the one-time development of casting wood molds to form a series of modules to meet various individual needs and cost-effective.
2.High repeatability
With more than 20 years of practical experience in research and development of plastic machines, using servo system, which is stable and fast, high efficiency and energy saving, low noise, high repeatability.
Zhejiang Sonly Intelligent Equipment Co., Ltd Injection Molding Machine
