multicolor injection machine U265TS2QS best injection molding machine

multicolor injection machine U265TS2QS

Product Description Advantages Of Shouli Series Advantages Of Shouli Series One.The Lock Section 1.Arch template, effectively protects the mould, especially suitable for big template with small mould. 2.The electronic ruler is installed on the crosshead, the position is more precise. 3.The front connecting rod uses connected structure, increases the rod strength, and easy for assembly. 4.The connected tail-board stills itself with big lock shaft, improves tail-board strength, and ensures zero abrasion of the tail-board, easy for maintenance. 5.Connected movable plate, improves its rigidity and reduces deformation. 6.Connected thrust bearing, improves its strength and stills itself with small lock shaft, ensures zero abrasion. 7.Arch template fully complies with mechanical property, largely improves template strength. 8.More reasonable toggle design, speeds and stabilizes mould opening and closing. 9.Adjustable movable plate mounting plate, makes the installation easier. 10.Mixed design of T-shape groove and die hole, increases universality of the mould. Two.The Injection Section.1.Bridge type support, improves injection smoothness. 2.Longer length-diameter ratio screw design, improves plasticizing effect. 3.Double seal structure, ensures no oil leakage. 4.Withhold type press plate, easy for debugging and assembly. 5.Bijection structure, improves stability.

SPECIFICATIONS		U265TS2QS/1200
		A	B	C	A	B	C
INJECTION UNIT
SCREW DIAMETER	mm	35	38	40	40	45	48
SCREW L/D RATIO	L/D	23.9	22	20.9	24.8	22	20.6
SHOT VOLUME	cm3	182.4	215	238.2	313.7	397	451.7
INJECTION PRESSURE	Mpa	219.3	186	167.9	191.1	151	132.7
SCREW SPEED	rpm	199			208
SHOT WEIGHT	g	166	196	217	166	196	217
SHOT WEIGHT	oz	5.855	6.914	7.654	10.053	12.734	14.498
CLAMPING UNIT
CLAMPING FORCE	Kn	2650
TOGGLE STROKE	mm	560
SPACE BETWEEN TIE BARS	mm	930*565
MAX.MOULD HEIGHT	mm	600
MIN.MOULD HEIGHT	mm	200
EJECTOR STROKE	mm	150
EJECTOR FORCE	Kn	38			38
EJECTOR NUMBER		3*2
OTHERS
DIE HOLE DIAMETER	mm	160
SYSTERM PRESSURE	Mpa	16			16
MOTOR POWER	Kw	11			15
HEATING POWER	Kw	12.7			13.2
OIL TANK CUBAGE	L	360
MACHINE WEIGHT	Ton	10
BOUNDARY DIMENSION	m	6.82.352.4
SERVO DRIVER CAPACITY	Kw	15			22
WHEEL DIAMETER	mm	1000
NOZZLE CENTER DISTANCE	mm	520