Sonly Servo Motor Series

U610TS Between tie bar: 885x810mm Shot weight: 2437gU610TS Between tie bar: 885x810mm Shot weight: 2437g

.Complete models Sonly has invested amount of money in the continuous design and development of 28 models of U-TS series of 98-3400 tons, and the one-time development of casting wood molds to form a series of modules ….Complete models Sonly has invested amount of money in the continuous design and development of 28 models of U-TS series of 98-3400 tons, and the one-time development of casting wood molds to form a series of modules …

Worldwide ShippingDelivery to any country

Shipping QuotationRequest a complete invoice

24/7 Technical SupportBefore and after sales

Factory WarrantyDirect manufacturer support

Chat on WhatsApp Request Quotation

A sales engineer will respond as soon as possible.销售工程师将尽快回复您。

Search Tags

Specifications		U610TS 4260
Injection Unit		A	B	C
螺杆直径 Screw Diameter	mm	85	90	95
螺杆长径比 Screw Ratio	L/D	23.4	22	20.8
理论注射容积 Theoretical Shot Volume	cm³	2388.0	2678.0	2938.0
注射压力 Injection Pressure	MPa	178.3	159.0	142.7
理论注射量(PS) Theoretical Shot Weight	g	2174	2437	2715
理论注射量(PS) Theoretical Shot Weight	oz	76.686	85.963	95.769
螺杆转速 Screw Speed	rpm	126
Clamping Unit
锁模力 Clamping Force	KN	6100
拉杆内距 Space Between Tie Bars	mm	850×810
最大模厚 Max Mould Height	mm	850
最小模厚 Min Mould Height	mm	290
顶出行程 Ejector Stroke	mm	225
顶出力 Ejector Force	KN	152
顶出杆数量 Ejector Number		12+1
模具定位圈 Die Hole Diameter	mm	200
Others
系统压力 System Pressure	MPa	16
油泵电机功率 Ordinary Motor Power	KW	45
加热功率 Heater Power	KW	42
油箱容积	L	900
机器重量 Weight	Ton	25
外形尺寸 (L×W×H)	m	8.9×2.3×3.0
伺服驱动器功率	KW	30+45

Specifications		U610TS 4260
Injection Unit		A	B	C
螺杆直径 Screw Diameter	mm	85	90	95
螺杆长径比 Screw Ratio	L/D	23.4	22	20.8
理论注射容积 Theoretical Shot Volume	cm³	2388.0	2678.0	2938.0
注射压力 Injection Pressure	MPa	178.3	159.0	142.7
理论注射量(PS) Theoretical Shot Weight	g	2174	2437	2715
理论注射量(PS) Theoretical Shot Weight	oz	76.686	85.963	95.769
螺杆转速 Screw Speed	rpm	126
Clamping Unit
锁模力 Clamping Force	KN	6100
拉杆内距 Space Between Tie Bars	mm	850×810
最大模厚 Max Mould Height	mm	850
最小模厚 Min Mould Height	mm	290
顶出行程 Ejector Stroke	mm	225
顶出力 Ejector Force	KN	152
顶出杆数量 Ejector Number		12+1
模具定位圈 Die Hole Diameter	mm	200
Others
系统压力 System Pressure	MPa	16
油泵电机功率 Ordinary Motor Power	KW	45
加热功率 Heater Power	KW	42
油箱容积	L	900
机器重量 Weight	Ton	25
外形尺寸 (L×W×H)	m	8.9×2.3×3.0
伺服驱动器功率	KW	30+45